Accurate low velocity gas flow measurement and wide turndown Fox meters are excellent choices, even at very low flow velocities
Direct Mass Measurement Measure the flow of gases directly in Standard Cubic Feet per Minute (SCFM) and other mass units without temperature or pressure compensation.
Low Pressure Drop and No Moving Parts A no moving parts design increases reliability and reduces maintenance costs.
Inline and Insertion Models available
Price Fox Flow Meters offer exceptional value in terms of initial, installed and lifetime cost-of-ownership.
Measures: Mass Flow Rate and Temperature; Equipped with CAL V™ (an in
situ calibration validation routine) No. of 4 to 20 mA Outputs: Two Pulse Output: One Display: Optional, LCD 2 line, 16 character, flow rate, total, temperature, elapsed
time, alarms Communications: USB standard; Optional HART or RS485 Modbus Approvals: FM/FMc: Explosion proof for Class I, Div. 1, Groups A, B, C, D; Nonincendive
for Class I, Div. 2, Groups A, B, C, D; ATEX Zone 1 (DC or AC powered):
II 2 G Ex d IIC T6 -20C>Ta>70C; II 2 D Ex tb IIIC IP68 T90C…300C; IP68; ATEX Zone
2 (DC powered only): II 3 G Ex nA IIC T6; -20C>Ta>70C; IECEx: Zone 1 (DC or AC
powered): II 2 G Ex d IIC T6 -20C>Ta>70C; II 2 D Ex tb IIIC IP68 T90C…300C; IP68;
IECEx: Zone 2 (DC powered only): II 3 G Ex nA IIC T6; -20C>Ta>70C; CE approved.
Contact or Discrete I/O: One discrete output for alarms & one discrete input to
reset total. Discrete output unavailable if pulse output is used. Power Input: 24VDC or optional 85-250VAC in local or remote enclosures.
Measures: Mass Flow Rate and Temperature No. of 4 to 20 mA Outputs: Two Pulse Output: One Display: Optional, LCD 2 line, 16 character, flow rate, total, temperature, elapsed time, alarms Communications: RS232 standard; Optional RS422/RS485 Modbus, Profibus-DP, DeviceNet & Ethernet Modbus TCP. Approvals: FM and FMc approved for Class I, II, III, Division 2, Groups A, B, C, D, E, F, G, T4 hazardous locations; NEMA 4X approved; CE approved; Remote NEMA 4X electronics enclosure with explosion proof sensor j-box. Contact or Discrete I/O: One discrete output for alarms & one discrete input to reset total. Discrete output unavailable if pulse output used. Power Input: 24 VDC or optional 85-250 VAC in local or remote enclosures.
Measures: Mass Flow Rate No. of 4 to 20 mA Outputs: One Pulse Output: None Display: Standard, LED, 4 character, flow rate, total, & elapsed time Communications: None Approvals: FM & CSA approved for Class I, Div. 1, Groups B, C & D areas; FM approved Dust Ignition Proof for Class II/II, Division 1, Groups E, F & G; indoor/outdoor NEMA Type 4; CE approved. Remote NEMA 4X enclosure not FM or CSA approved. Contact Or Discrete I/O: Two relay outputs for alarms Power Input: 24 VDC in local and remote enclosures. Optional 85-250 VAC in remote NEMA 4X enclosure.
Fox
Thermal Instruments, Inc. 399 Reservation Road | Marina, CA 93933 |
Phone: (831) 384-4300 | Fax: (831) 384-4312 | Copyright 2005-2011
Applications
FAQ's
